92% orders dispatched same day
Estimated delivery for in-stock products
BNE 1-4 days
SYD 2-4 days
MEL 1-4 days
Please add your vehicle details
Brand New Old Stock (Product in perfect condition, Packaging is aged and warn - Painted Yellow Via Lovells for special order)
Lovells coil springs are manufactured to the highest standard in Australian Made OneSteel micro alloy steel.
Product Type:  Lovells - Coil Spring
Reference: ZPN-39665
Warranty: 6 months Warranty
AUD $47.95 incl. GST
Coil Spring (Front LH or Front RH) Lovells
Brand New Old Stock (Product in perfect condition, Packaging is aged and warn - Painted Yellow Via Lovells for special order)
Lovells coil springs are manufactured to the highest standard in Australian Made OneSteel micro alloy steel.
Product Type:  Lovells - Coil Spring
Reference: ZPN-39665
Suits Suzuki Sierra SJ80

Please note that this fitment list is a guide only. To get a Match-FitTM guarantee, simply add your correct vehicle details.
All our products are brand new
6 months Warranty
About Lovells
Lovells Coil Springs

Passenger Cars Catalogue link here - www.lovells.com.au/cars
4x4 Spring Catalogue link here - www.lovells.com.au/4x4

Lovells Coil Springs are designed as a superior performance replacement part for mass-produced O.E (Original Equipment) coil springs, they exceed original ratings by 10% - 50% (depending on the application), thus handling is dramatically improved and many ride height variations are available for most makes and models. Lovells coil springs are manufactured to the highest standard in Australian Made OneSteel micro alloy steel. Many Lovells coil springs are of progressive rate design. This design enables the spring to increase in spring rate when you need it and decrease when you don't; insuring the ultimate in handling and ride comfort.

All heating and tempering furnaces are electronically controlled to precise temperatures. Each spring is individually hot coiled on a variable speed PLC (Programmable Logic Controlled) coiling machine. After oil quenching and tempering, the springs are rate tested on a sample basis and scragged solid to achieve the maximum fibre stress.The springs are then shot peened ready for protective surface finishing, prior to powder coating. After final inspection the springs are packaged in protective cardboard boxes (unless specified otherwise) ready for warehousing or dispatch.

Installation Tips

  • Measure your vehicle's ride height before installing Lovells Springs. This will ensure you know the amount of lowering after installation. On a level surface, measure from the upper wheel rim to the highest point of the fender well, before installation and after. And before you measure 'after' dimension, drive the car hard for ten miles to let the springs, spacers, etc. settle properly.
  • Before removing springs from your car, put a sequential number mark on each component, from top to bottom. This will help you reassemble the new and existing parts in correct order.
  • Before disassembling the strut assembly, draw a vertical line with a marker across each component. This will help you reinstall all the OE parts with the original factory orientation.
  • Mark the position of all alignment-related mounting bolts. This allows a good starting point for the post-installation alignment.
  • Work on one corner of the car at a time. Some OE strut assemblies have up to 10 pieces which must be assembled in the exact order in which the factory installed them. Disassemble one corner, and if you make a mistake or lose track of the order of assembly, you can refer to the corresponding assembly as a reference.
  • Reinstall all bolts in the same oreintation (up or down) in which the manufacturer installed them.
  • Mark parts to indicate left and right side before removal. Many parts are designed specifically for the left or the right side of your car.
  • Note any protective tubing on the factory springs, and the locations. Lovells springs are designed to reuse all factory tubing and isolators to prevent noise and premature wear.
  • Many struts on front-wheel-drive cars have a steering bearing located between the shassis and upper strut mount. Note the orientation and be sure not to contaminate or disassemble the bearing. Proper care must be taken to ensure this bearing is installed exactly as the factory installed it to prevent steering noises and premature wear of related steering components.
  • Brake lines and anti-lock brake sensors: Note the routing and mounting positions of all wires, cables and brake lines. Reinstalling the links differently from the factory oisition can result in damage or brake failure.
  • Support the spindle and brake assemblies with wire, wire coat hangers or welding rod. Failure to support the spindle may allow the inner axle to disengage from the transmission.
  • Do not let the brake calliper os spindle hang on the brake line. This may damage the brake line and cause premature wear or even failure of the line.
  • Always uise the proper spring compressor to remove springs from your car, or when desassembling a strut. Springs store an enormous amount of energy and can seriously injure you os someone else if this energy is releassed unexpectedly.
  • Leave 1/4" to 1/2" space between the end of the coil and the spring seat pocket. This will help prevent spring noise when encountering large bumps.
Product Reviews
Shop With Confidence
shop with confidence match-fit icon
Match-FitTM Guarantee
Shop with the confidence of knowing that if our website says it fits, then it's guaranteed to fit.
Our Match-FitTM 100% fitment guarantee applies to all parts where we display the Green fitment message "This fits your (vehicle model)".
To get a Match-FitTM, simply add your correct vehicle details to our website, easy!
shop with confidence aussie business icon
100% Aussie owned and operated
OnlineAutoParts.com.au launched in 2006. To better serve our customers (and provide low prices) we invest locally in our stock, systems and people.
We're committed to delivering high-quality parts at the lowest cost possible and delivered as fast as possible
  • All our parts experts and support teams are located here in Brisbane, Australia.
  • Great Parts coverage for Cars and 4X4s with comprehensive warranties.
  • Related product bundles and Complete product kits.
  • Delivering Australia-wide as well as to New Zealand, USA, UK and more. See all countries See more
Australian Part Specialists Available icon
Car & 4X4 Parts advice available from Australian office
If you can't find what you are looking for, have a special quote request or have doubts about fitment.
Our knowledgeable Australia based parts specialists team are available to assist you on 07 3265 6228 from 8am to 5pm AEST Monday to Friday.
shop with confidence payment icon
Secure Payments
As an online business, your security is a priority, all payments are secured with HTTPS and TLS encryption. Additionally, all payment methods we support are from PCI compliant providers. Meaning your payment information is always secure and protected.
We offer multiple payment options including Visa, Mastercard, PayPal, Zip, Google Pay and Apple Pay and *Direct Deposit.
  • Card holder data is safely secured with the payment gateway using multiple encryption keys. All data secured with HTTPS & SSL.
  • Payment details are stored under PCI compliance, which is a set of standards created by the payment card industry.
  • Saved payment details will be ready to use in your next purchase, for a quick and easy payment process.

*Note: Direct Deposit is not available for international orders.

DirectDeposit Visa Mastercard PayPal Zip Google Pay Apple Pay
Vehicle Fitment
SuzukiSierraSJ801996-1998incl.: JX, Limited Edition JX, Trax4X42door HardtopFront LH or
Front RH
Gives 40mm Lift with Bar no Winch
SuzukiSierraSJ801996-1998incl.: JX, Limited Edition JX, Surf JX, Trax4X42door SofttopFront LH or
Front RH
Gives 40mm Lift with Bar no Winch
1996 1997 1998
Copyright © 2021 Online Auto Parts. All rights reserved.
document load scripts